SG / 250G Sand Dredging Pumps Sing Casing For Abrasion - Resistance
Introduction:
The series of gravel pump mainly horizontal, single pump shell structure of the centrifugal pump based. A special clamp clamp the pump body and the pump cover, the direction of the pump outlet in 360 degrees in any one location, easy to install.
Gravel pump is the introduction of technology products, the pump used to connect a single cassette pump structure, single-stage single-suction cantilever centrifugal pump, with light weight, good cavitation performance, strong abrasion resistance, over-current channel width, installation Easy to use, etc., can be large particles of strong abrasive sand continuous transport, for dredging dredging, sand mining sand pumping, dredging the river.
Slurry pump structure: The series of gravel pump by the pump head, sealing components, bearing components, brackets and other components, bearing lubrication for the grease lubrication. The impeller, the pump body, the front guard plate and the rear guard plate are all made of high anti-wear high chromium alloy or wear-resistant alloy steel with hardness of not less than 58HRC.
Specifications:
| Model | SG-200F |
| Outlet | 8-inch |
| Capacity | 216-936m3/h |
| TDH | 8-52m |
| Rated Motor Power | 560Kw |
| Speed | 500-1000r/min |
| NPSH | 3-7.5m |
Explosive View of SG Gravel Pumps:
Standard Material of Wet-end Parts: Hi-Chrome Alloy A05
Typical Applications:
Sand and Gravel
Sand Excavation
Hydraulic Mining
Cyclone Feeds
Slag Granulation
Tunnelling
Performance Curve:
