8 / 6E - G Sand and Gravel Pump Widely Used on Cutter Suction Dredger
Introduction:
Application:
1. To extract mud and sand for ships,river dredging and mining.
2. For long –distance transmission of big partical or strong corrosive materials
that general slurry pump can’t transport.
Features:
1. Horizontal, centrifugal, one stage, centrifugal gravel and slurry pump.
2. Made up of pump,bearing assembly,seal assembly,bracket and so on.
3. Wear resistant wet parts which is made of hard metal (Chrome alloy).
4.Long bearing life: The bearing assembly with large diameter shaft and short overhang.
5.Mechanical seal, expeller seal and packing seal
6.Pump discharge direction in any of 360 degree.easy installation
7.Wide passage , good performance of NPSH, anti-wearing and anti-corrosion, high efficiency
Specifications:
| Model | SG-150E |
| Outlet | 6-inch |
| Capacity | 126-576m3/h |
| TDH | 6-45m |
| Rated Motor Power | 120Kw |
| Speed | 800-1400r/min |
| NPSH | 3-4.5m |
Explosive View of SG Gravel Pumps:
Standard Material of Wet-end Parts: Hi-Chrome Alloy A05
Typical Applications:
Sand and Gravel
Sand Excavation
Hydraulic Mining
Cyclone Feeds
Slag Granulation
Tunnelling
Performance Curve:
