Slurry Pump Spare Parts Frame Plate Liner With PU Rubber Coating
1. Introduction:
CNSME pumps are the most popular slurry pumps on the market, CNSME pump parts consist mainly of impellers, liners, throatbush, frame plate liner insert, seals, shaft sleeves etc. A good number of customers use CNSME pumps and Pump Parts.
Rubber Slurry Pump Spare Parts are mainly pump wetted parts and directly contact with slurries, They are very crucial to the service life of slurry pumps. The wetted parts include impeller, liners, throatbush, frame plate liner insert, casing etc. The rubber slurry pump parts are more suitable for delivering strong corrosive or abrasive slurries of small particle size without sharp edges.
OEM part codes ALTERNATIVE PUMP SPARES
Here we list some OEM part codes for reference:
Impeller: 127, 147, 145, etc., such as C2127, D3147, E4147, E4083, F6147, G8147, G10147, FAM1247...
Volute liner, C2110, D3110, E4110, F6110, G10110, G12110, .
CNSME Rubber Slurry Pump Parts:
Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
• Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
1. Standard slurry pump spare parts can be 100% replaced.
2. OEM slurry pump spare parts offered.
3. Material: Alloy metal, natural rubber slurry pump spare parts.
4. Good performance, long wear life of high quality slurry pump spare parts.
5. Reliable quality with top technique slurry pump spare parts raw material.
6. As your requirements or your drawing to manufacture any slurry pump spare parts for you.
Completely interchangeable with world famous brand.
For unlisted slurry pump parts, OEM service offered. Drawings needed.
2. Materials
High chrome alloy
Natural rubber
Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, etc.
Pump parts materials show
| No. | ITEM | MATERIAL |
| 1 | Impeller | High-chrome alloy |
| Rubber |
| 2 | Volute casing | High-chrome alloy |
| 3 | Front liner plate | High-chrome alloy |
| Rubber |
| 4 | Rear liner plate | High-chrome alloy |
| Rubber |
| 5 | Liner | High-chrome alloy |
| 6 | Expeller | High-chrome alloy |
| 7 | Shaft sleeve | 3Cr13 |
| 8 | Water-seal ring | High-chrome alloy |
| 9 | Shaft | 45#steel quenching And high temperature tempering |
| 10 | Bearing housing | Gray iron |
| 11 | Expeller ring | High-chrome alloy |
| Rubber |
| 12 | Front casing | Gray iron or Nodular cast iron |
| 13 | Rear casing | Gray iron or Nodular cast iron |
| 14 | Base | Gray iron |
| 15 | Support | QT500-7 |
3. Short delivery time
For some parts, stocks are available. We have large producing capacity to shorten the delivery time.
4. Frame & Bearing Assembly types
Types: B, C, D, E, F, R, X, ST, T, TU, CC, DD, EE, FF, etc.
