Shijiazhuang Minerals Equipment Co. Ltd
SHIJIAZHUANG MINERALS EQUIPMENT CO. LTD WE SPECIALIZE IN SLURRY PUMPING WHAT YOU REQUIRE IS WHAT WE CARE
Add to Cart
Paper and Pulp Industrial Slurry Pump with Discharge 4 inch and Suction 6 inch
Introduction:
6/4E-R rubber slurry pumps are widely used in many differing industries, some of which are listed as below:
1. Palm oil, phosphate, potash, papaer and pulp, sand and gravel, silver, steel, sugar;
2. Tar sands, tin, titanium, tobacco, uranium, water and sewerage utilities, woldram and scheelite.
Below is a rubber pump 6/4E-R used in Peru, for the handling of quarries. Over the past 7 years, our client only changed the inner liners for twice, with other parts of this pump remaining workable.
Specifications:
| Model | SHR-100E |
| Outlet | 4-inch |
| Capacity | 144-324m3/h |
| TDH | 12-45m |
| Rated Power | 120Kw |
| Speed | 800-1350r/min |
| NPSH | 3-5m |
Construction of Slurry Pump:
Typical Applications:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
Impeller and Inner Liners Material: Black Rubber R55
| Natural Rubber R55 | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12 ≤65℃ |
Performance Curve: