Shijiazhuang Minerals Equipment Co. Ltd
SHIJIAZHUANG MINERALS EQUIPMENT CO. LTD WE SPECIALIZE IN SLURRY PUMPING WHAT YOU REQUIRE IS WHAT WE CARE
Add to Cart
SHR Slurry Pumps SHR / 200ST Natural Rubber Lined Horizontal Type
Introduction:
12/10ST-R slurry pump has a 10-inch outlet, the capacity is 720-1620m3/h with head 7-43m.
Slurry pump pump body with replaceable rubber lining, impeller, shield, front and rear sheath are made of wear-resistant decay-resistant rubber.
Adhesive pump is suitable for conveying small particle size, no sharp corners and high concentration of slurry particles, can also transport corrosive slurry.
Seal : packing seal, vice impeller seal, fill the auxiliary impeller seal, mechanical seals and other types.
Specifications:
| Model | SHR-250ST |
| Outlet | 10-inch |
| Capacity | 720-1620m3/h |
| TDH | 7-43m |
| Rated Motor Power | 560Kw |
| Speed | 300-500r/min |
| NPSH | 3-8m |
Construction of Rubber Slurry Pump:
Typical Applications:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
Standard Material of Wet-end Parts: Natural Rubber
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve: