Shijiazhuang Minerals Equipment Co. Ltd
SHIJIAZHUANG MINERALS EQUIPMENT CO. LTD WE SPECIALIZE IN SLURRY PUMPING WHAT YOU REQUIRE IS WHAT WE CARE
Add to Cart
Rubber Lined Slurry Pumping Equipment , Minerals Concentrate Rubber Pumps
Introduction:
Rubber lined slurry pumping equipment from SME are designed for moving corrosive, abrasive, thick, or solid-filled slurries through a piping system. Due to the nature of the materials they handle, they tend to be very heavy-duty pieces of equipment, made with durable materials that are hardened for handling abrasive fluids for long periods of time without wearing excessively. Slurry pumps are useful in any application in which fluids containing abrasive solids are processed. These include large mining, mine slurry transport, and minerals processing plants. In addition, they are used in sand and gravel dredging, and in plants that produce steel, fertilizers, limestone, cement, salt, etc. They are also found in some agricultural processing facilities and wastewater treatment plants. SHR/75D rubber lined slurry pump can be connected a maximun 60Kw motor, and when the rubber parts are worn out, they can be replaced by both rubber liners and metal liners based on the fact that the slurries may change from corrosive to abrasive. Slurry pumps are perfect for moving, transporting dirty water, slurries, slag and silt.
Specifications:
| Model | SHR-75D |
| Outlet | 3-inch |
| Capacity | 79.2-180m3/h |
| TDH | 5-34.5m |
| Rated Motor Power | 60Kw |
| Speed | 800-1800r/min |
| NPSH | 3-5m |
Construction of SHR Rubber Pumps:
Typical Applications:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
Standard Material of Wet-end Parts: Natural Rubber
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve:
Projects with SHR Rubber Pumps: